OCM™

Non-fluorinated hydrophobic & oleophobic surface modifier that creates a covalent bond that provides exceptional durability on hard & soft surfaces.

Overview

OCM™ is a non-fluorinated surface modifier product that can create an omniphobic surface that repels water and oil on hard and soft surfaces. OCM™ is a water-based chemistry that covalently binds to hard surfaces in an instantaneous reaction to exhibit water & oil repellency. This new chemistry is PFAS/PFOS-free and provides a sustainable replacement without the health, safety, and Environmental hazards of forever chemicals. With cationic character, it can be formulated with quats and non-ionics, mixing well with other shine agents and surface modifiers. OCM™ forms long-lasting bonds (on appropriate surfaces) and requires no special curing before application for surface modification and can produce highly omniphobic surfaces with contact angles as high as 108°, restore shine to the surface, and exhibit excellent lubricity.

Cost / Performance

Non-fluorinated sustainable PFAS & PFOS replacement
Forms long lasting bonds resulting in fewer applications, thereby saving costs
Easy to apply and binds to surfaces with little or no buffing
Provides a durable beading effect on modified surfaces
Will produce highly hydrophobic surfaces
Exhibits oil repellency on many surfaces
May be formulated with other surface modifiers/shine agents
Excellent lubricity and shine on hard surfaces
Restores gloss and shine to surface
No VOC s required for surface modification

Uses & Applications

Ceramic shine on car after wash
Additive for water repellent windshield wash
Fabric treatment
Water repellent on leather
Paver stone/concrete water repellent treatment (also enhances removal of oil spills)
Granite countertop treatment

Environment / Health & Safety

PFAS & PFOS free, non-fluorinated Chemistry
Water based chemistry
Freely soluble in DI water at any levels
VOC exempt

Performance

Suggested Starting Formulations

*Denotes Vitech Product

Automotive Ceramic Spray and Shine

(RTU – simply apply in small sections and wipe with microfiber towel)

OCM™ *1.5%
CTD100™ *0.5%
1% Silicone Fluid Emulsion (60%)1%
PreservativeQS
DI WaterBalance

Granite Countertop Sealer

(Apply as is, wipe, rinse with wet sponge; repeat)

OCM™ *5%
PreservativeQS
DI WaterBalance

Fabric Guard

(RTU – dip fabric in formulation or simply spray on - remove excess and allow to dry)

OCM™ *2.5%
PreservativeQS
DI WaterBalance

Windshield Ceramic Fluid (-40 ℃)

(Use as is to -40C)

DAN™ *0.2%
OCM™ *0.25%
Ethanol60%
PreservativeQS
DI WaterBalance

Product Specifications

Appearance:

Clear to slightly hazy liquid

pH (as is):

5-7

Specific Gravity @ 23ºC:

0.95-1.01

Solids %:

18.5-22.5%

Glass Contact Angle (1% in DI Water):

85 degrees minimum

Package & Handling

***DI or RO water (<20 µS/cm) must be used in production. If not available, contact your sales rep for assistance. We recommend the use of Acticide MBS to preserve OCM™ formulations.
**Formulating tips : OCM™ is a microemulsion and therefore formulating requires some care. In general, the best way to formulate with OCM™ is to add DI water first and then OCM™ to establish that emulsion. Then add any other ingredients with mixing to finish the formula. Contact your sales representative if there are any questions
OCM™ is available in 55 US gal plastic drums (Net wt 441 lbs) and 5 US gal pails (net wt 40 lbs)

Request A Sample

By submitting a request, you are agreeing to our Privacy Policy and Terms and Conditions

Name

Email

Phone

Message

Terms and Conditions | Privacy Policy