BJSi™

A safe, low pH organic salt used to replace hydrochloric acid and other traditional acids


Overview

BJSi™ is a proprietary, low pH, organic salt used to replace traditional mineral and organic acids. BJSi™ can remove calcium carbonate 50-80% more effectively than phosphoric, citric, and glycolic with additional safety, shipping, and handling benefits. Ideal for formulating a Green Seal® or ECOLOGO® approved product, BJSi™ is phosphate free, VOC exempt and a low contributor to BOD/COD in effluents.

Cost / Performance

  • Performance and cost advantages when dissolving calcium scale compared to citric, phosphoric, glycolic, and sulfamic acid
  • Non-corrosive to skin and mild steel
  • Non-fuming
  • Ideal for concentrated acid cleaners

Uses & Applications

  • Bathroom
  • FoodAndDairy
  • Green
  • Marine
  • MetalCleaners
  • Industrial Tub and Tile and Bowl Cleaners
  • Descalers/Delimers
  • Concrete Floor Cleaners and Etch
  • Pool and Spa cleaners
  • Transportation Cleaning - Acid Presoaks
  • Concrete Truck & Equipment Cleaners
  • Food and Dairy Cleaners
  • Marine Cleaning

Environment / Health & Safety

  • Classified as a mild skin irritant (including as supplied)
  • Approved by the US EPA as a non-food inert ingredient in biocide applications
  • Phosphate free, contains no VOCs, and is a low contributor to BOD/COD in effluent

Performance

Suggested Starting Formulations

*Denotes Vitech Product
Industrial Bowl Cleaner
  • WaterBalance
  • BT™*1.3%
  • BJSi™*25%
  • Add BT™* to water and mix until homogeneous, add BJSi™* and mix until clear
I&I Tub and Tile & Grout Cleaner
  • WaterBalance
  • BJSi™*10-15%
  • MSI™*0.25-0.40%
  • Q3™*2-4%
  • FragranceQS
Fiberglass Boat Hull Cleaner

Use as-is or 5:1 dilution

  • WaterBalance
  • BJSi™*30-50%
  • Q3™*1%
  • Formulation can be thickened with 3-5% BT™*
Concrete Truck/Equipment Cleaner

Use as-is to 30 - 50:1

  • WaterBalance
  • BJSi™*25-50%
  • Q3™*0.5%
  • If overspray on metal surfaces is a concern, add 0.6-1.25% MSI™*.

Product Specifications

Appearance @ 20ºC:

Clear Amber Liquid

Density @ 23ºC:

1.21 +/- 0.2

Boiling Point:

Approx 100ºC

Freezing Point:

Below -30ºC

Solubility:

100% in Water

pH (as is):

0.7

pKa:

0.176

Activity, %:

60.0 (Typical)

Package & Handling

  • BJSi™ is available in 55 US gallon polyethylene drums (net wt. 550 lbs) and 5 US gallon pails (net wt. 40 lbs)
  • Product can be stored in high-density polyethylene, polypropylene, or fiberglass containers. BJSi™ should NOT be stored or left overnight in stainless steel tanks due to potential corrosion of welds.
  • It is recommended that customers evaluate their particular formulation to determine if vented caps are needed.

Regulatory / Tox Information

DOT: Non-regulated

TDG: Regulated

IATA: Regulated

REACH compliant

LD50 (rat, oral): 1121 mg/kg

LC50 (OECD 202): 71 mg/L at 48 hours

Dermal Irritation: Mild Skin Irritant

USA EPA Inert Ingredient: Approved by the US EPA as a non-food inert ingredient in biocide applications.

Request A Sample